Look 360 Panorama

| 
| 
| 
| 
| 
| 
Here are some "making of" pictures:
This is the first version of the lift system.
The idea was to connect two gondolas together with a long thread.
The gondolas balance each others. This pulley just moves the
thread back and forth and the gondols go up and down.
| 
I added a rubber ring of a train wheel to add friction
and prevent the thread from slipping.
| 
| 
| 
| 
It didn't work. The thread slipped. Maybe I should have
tested it with thicker thread and make it do an extra round
around the pulley but I didn't.
| 
Instead, I took a bigger rubber for the pulley. It has
a gap for the tread so the rubber touches the thread also
from sides and add friction.
| 
| 
However, it was too big. There wasn't room enough for two
of them so that the motor could easily turn them both.
| 
So I ended up to use 4 reels. They won't slip. After this
version I added a friction gear in case I miss to stop the lift
when the gondolas hit the top of the tower. I have also added
some gears to turn the sign on top.
| 
| 
| 
| 
| 
The parts of the original tower are splitted in half.
The parts would be about 16-18 studs long in this scale.
4 halfs are stacked on each other for transportation.
That way the tower parts take 50% less space on trailers.
Why didn't I pack the tower parts that way?
| 
Here is why. Two lego halfs take as much space as the
unsplitted tower. It doesn't save space at all.
| 
The build-ups and pull-downs are quicker and the tower
parts are easier to handle.
| 
| 
| 
| 
| 
| 
| 
I found these pictures in the net. If they are yours and you
don't want them to be here just e-mail me and I'll take them away.
| 
| 
| 
| 
| 
| 
| 
| 
| 
| 
| 
| 
| 
| 
| 
| 
| 
| 
| 
| 
| 
| 
| 
| 
| 
| 
| 
| 
| 
| 
Photo from Kirmesforum.de
| 
| 
| 
| 
| 
Photo by Martijn H. at Dusseldorf, Germany 2024
| 
| 
Photo by Martijn H. at Dusseldorf, Germany 2024
| 
| 
| 
| 
| 
| 
Photo from Kirmesforum.de
| 
| 
| 
Video here:
Look 360 Panorama.mp4
|