Chevy Blazer

Scale 1/16

The first version was too big for the scale so I had to start the
building all over.

I had a little problem with the tailgate. How to separate the shiny
plate in the middle from the cleats? I tested dark grey but it didn't look good.

Then I remembered that I had bought some 1x1 plates from Legoland
in Denmark in 1996 with the color between white and light grey.

Here is another problem: 2x2 headlights were too big but 1x1 were too small.

The solution was a yellow clickits part.

I found these pictures from the net. If they are yours and you
don't want them to be here just e-mail me and I'll take them away.